STANDARD IGNITION APS133 Accelerator Pedal Sensor

( Brand: Standard Ignition ), ( Type: Accelerator Pedal Sensor ), ( Manufacturer Part Number: APS133 ), ( Material: Material ), ( Item Height: 7.800 ), ( Item Length: 15.800 )

Review STANDARD IGNITION Accelerator Pedal Sensor

The APS133 Accelerator Pedal Position Sensor is an essential automotive component that plays a vital role in ensuring the efficient functioning of your vehicle's fuel injection system and engine management. This sensor is specifically designed to monitor the position and movement of the accelerator pedal in real-time, converting the linear pedal motion into an electrical signal that is sent to the engine control module (ECM).

The sensor uses a variable resistor technology to measure the pedal position, which generates a resistance value that is proportional to the pedal position. As the accelerator pedal is pushed, the resistance value decreases, indicating a greater demand for fuel and ignition. Conversely, as the pedal is released, the resistance value increases, signaling a decrease in fuel demand and the need for a leaner air-fuel mixture.

The APS133 Accelerator Pedal Position Sensor is robustly built to withstand the harsh operating conditions in a vehicle environment. It is designed with a durable ceramic construction, which provides excellent resistance to wear, vibration, and corrosion. The sensor also features a built-in heater to ensure optimal performance in cold weather conditions.

Installation of the APS133 Accelerator Pedal Position Sensor is a relatively straightforward process, typically involving the removal of the old sensor and the plugging in of the new one into the relevant wiring harness. However, it is always recommended to consult your vehicle's service manual for specific instructions and precautions.

This sensor is compatible with various makes and models of vehicles, making it a versatile solution for a wide range of applications. Its precise and reliable performance ensures that your engine receives the optimal fuel-air mixture at all times, resulting in improved fuel efficiency, increased power, and smoother driving.

It is essential to note that a faulty accelerator pedal position sensor can result in various driveability issues, such as poor acceleration, stalling, and irregular idling. Regular maintenance and timely replacement of this critical component can help ensure the longevity and overall performance of your vehicle.

Buying a standard ignition APS133 accelerator pedal sensor has its advantages and disadvantages that every consumer must consider before making a purchase decision. Both new and rebuilt sensors are available in the market, and each option comes with its unique pros and cons.

1. High precision: A new APS133 sensor can provide more accurate and consistent readings as compared to a rebuilt sensor.

2. Longer lifespan: A new sensor is less likely to fail in the near term, ensuring peace of mind and reducing potential repair costs.

3. Warranty: A new sensor typically comes with a warranty that covers defects and malfunctions, ensuring protection against potential issues.

1. Higher cost: A new APS133 sensor is more expensive than a rebuilt sensor because it is a brand-new part.

2. Availability: New sensors may be harder to find or may have longer shipping times, depending on the supplier and availability.

1. Lower cost: A rebuilt APS133 sensor is generally less expensive than a new one, making it an attractive option for those on a budget.

2. Availability: Rebuilt sensors are often more readily available and can be shipped faster than new sensors.

1. Potential for lower precision: Rebuilt sensors may not provide the same level of accuracy as new sensors, as they are refurbished and not brand new.

2. Shorter lifespan: A rebuilt sensor may be more prone to failure in the long run since it has already been used and may contain worn-out components.

3. No warranty: Rebuilt sensors usually do not come with a warranty, meaning consumers bear the risk of any potential issues.

When deciding between a new and rebuilt APS133 sensor, consider factors like precision requirements, available budget, and desired lifespan. If precision is crucial and you can afford it, a new sensor may be the better choice. However, if budget is a constraint, and availability is important, a rebuilt sensor might be the more feasible option. In the end, the decision depends on individual priorities and needs.

part # aps133 prices

• $141.99-$166.99

specifications injectiopug:

• brand: Standard Ignition
• type: Accelerator Pedal Sensor
• manufacturer part number: APS133
• material: Material
• item height: 7.800
• item length: 15.800

offer injectiopug:

• options: Ship-to-home
• quantity: 2
• started: January 24, 2025
• sold: 0
• availability: In Stock

seller injectiopug:

• rating: 98.7%
• # reviews: 80297

general injectiopug:

• Air Fuel Delivery > Fuel Injection Parts > Additional Fuel Injection Parts
• condition: New

returns injectiopug:

• time: 30 Days
• paid by: Seller
• policy: Returns Accepted

payments injectiopug:

• credit card: Diners-club
• other
• wallet: Paypal

shipping injectiopug:

• service: Standard
• class: Standard
• type: Fixed
• transit: 5-10 Days
• cost: $0.00

Standard Ignition APS133 Is Similar To:

• Standard Motor Products Mf5288 Mass Air Flow Sensor Reman (47.3% similar) $75.00–$212.07. (August 24th, 2024)
• Standard Motor Products Stoc2007v1 Engine Management Application Guide Ignition Emissions 1981-1990 (30.3% similar) $14.98–$19.13. (August 24th, 2024)
• Standard Motor Products Stenb-02 Engine Management Illustrated Parts Guide Ignition Emissions 1980 (30.5% similar) $5.40–$15.02. (August 25th, 2024)
• Standard Motor Products Mf9654 Mass Air Flow Sensor Reman (47.3% similar) $71.96. (August 26th, 2024)
• Standard Motor Products Mf0886 Mass Air Flow Sensor Reman (47.3% similar) $30.00–$44.99. (September 10th, 2024)
• Standard Motor Products Mf5877 Mass Air Flow Sensor Reman (47.3% similar) $76.99–$127.79. (September 10th, 2024)
• Standard Ignition Ry-1712 Oem 2010 F150 Lariat Fuel Pump Driver Module Relay (49.6% similar) $35.00–$51.14. (September 26th, 2024)
• Standard Motor Products Mf0863 Mass Air Flow Sensor Reman (47.3% similar) $69.99–$127.03. (October 3rd, 2024)
• Standard Motor Products Mf3940 Mass Air Flow Sensor Reman (47.3% similar) $119.52–$120.99. (October 3rd, 2024)
• Standard Motor Products Mf14383 Mass Air Flow Sensor Reman (46.8% similar) $39.49–$101.93. (October 4th, 2024)
• Standard Motor Products Mf21207 Mass Air Flow Sensor Reman (46.8% similar) $80.99–$121.95. (October 4th, 2024)